Pig feeding system

  • Comederos porcino

The cost of feed is the determining factor for the profitability of a pig farm. You need to choose feeders or hoppers that ensure, by their design and the material used, minimum feed waste as well as easy handling and cleaning.
Hoppers are suitable for the use of pellets, granules or flour; they can be mounted on the partition wall or in the center of the pen.


Stainless steel troughs


  • Made of 304 stainless steel.
  • Reinforced rounded rims without sharp edges to protect the animal and reduce feed waste.
  • Hygiene guaranteed by the smooth surface of the stainless steel, which prevents the accumulation of feed, and by the possibility of installation raised from the ground for easy cleaning.
  • They are a flexible solution thanks to their simple single or modular installation.
  • Suitable for dry and wet feeding.
  • Two types: with equal wings for embedding and unequal wings for raised installation.


Feeders for farrowing


High-density injected polypropylene feeder 

  • Maximum hygiene due to the absence of corners that accumulate feed.
  • Double stainless steel protectors.
  • 12L capacity.


Feeder for dry feed.

  • Rounded finish, with side and front folding with no sharp edges preventing injuries to the sow.
  • Robust, made of 304 stainless steel.
  • 13L capacity and 400mm in length.
  • Hygienic, no angles to accumulate feed.



Feeder for liquid feed

  • Rounded, perfectly folded edges that prevent animal damage.
  • Durable, made of 304 stainless steel.
  • 16L capacity and 500mm in length.
  • Clean, with rounded design that prevents accumulation of feed remains.


Stainless steel starter pans


  • Supplement lactation and initiate the piglet in solid feed.
  • 304 stainless steel.
  • Floor fastening adaptable to any type of slat.
  • The separations prevent feed wastage.
  • 2L capacity

Transition hoppers


  • Improve transition to weaning phase, avoiding the abrupt change from maternal food to meal.
  • For piglets in farrowing
  • Made of pre-painted steel, with two feeding compartments.
  • Supplied dismounted for easy transport.


Compartment hoppers for dry feed


  • Made of 304 stainless steel, a material that ensures durability, cleaning and disinfection.
  • Supplied dismounted to reduce transport costs.
  • Fully bolted for easy assembly.
  • With flow level adjustment to regulate the amount of feed.
  • The rounded rims with no sharp edges protect the animal and reduce feed waste.
  • Single for groups of up to 30 animals or double for groups of up to 60 animals.

Circular hopper


  • Automatic, piglets ingest feed and water without extra support.
  • For piglets of 6kg and over.
  • Minimum feed waste, with precise regulation through 25 levels and a 0.92mm outlet.
  • Capacity to separate dry feed and water.
  • The tray is made of stainless steel to ensure hygiene and long life.
  • Single or doublé.


Modular stainless steel hoppers for dry feed



  • Modular design to adjust the number of compartments required according to the needs of a group of animals.

  • The hopper capacity is 61 L, for up to 12 pigs from 25 kg live weight.

  • They can be supplied assembled or dismounted, to optimize transportation.

  • Easy assembly, just by stainless steel screws.

  • Made of stainless steel from the 304 series, which ensures durability,

    cleaning and disinfection.

  • Rounded edges to protect the lip of the animal and reduce feed waste.

  • Perfectly folded, without sharp edges to avoid injury to pigs.

  • Screwed on the outside so that inside there is no retention of feed.


  • Exact easy-to-use regulation of feed with 7 levels, with outer slide gate .

  • V shape at the bottom to facilitate the exit of feed and prevent clogging.

  • Supplement accessory to increase the capacity up to 19 kg, specially designed for sows in groups.

Single stainless steel hoppers for dry feed


  • Made of stainless steel from the 304 series.
  • With 12-level flow adjustment for precise regulation.
  • Can be used from weaning until the end of fattening
  • Easy assembly, just by stainless steel screws.
  • Can be supplied assembled or dismounted, improving transport.
  • The properly folded edges prevent feed wastage and protect the lip of the pig.
  • Single with 5 compartments and double with 4 and 5 compartments.

Circular hopper for wet feed

Tolva de engorde circular

  • The design prevents minimal waste of feed.
  • Supplies abundant feed and water in a short time
  • Because the water comes out through a pipe, this prevents the animal splashing in hot weather and caking the feed.
  • Single or double.